ABOUT US
关于我们
Inspection Equipment
检测设备
▲ 钢化颗粒测试
Fragmentation Test
确保在 50MM X50MM 正方形区域内钢化破碎颗粒达到 80~120颗。
The fragments particles ensure achieveto8~120PCS in 50MM x 50MM square area.
▶ 钢球跌落测试
Impact resistant Test
用 227 克钢球从1.8米高度冲击中心孔至玻璃边缘的中间点不破碎。
Use 227g steel ball from the height of7.8monto glasssurface( 1/2 place betwen center of hole and the glass edge)no broken.
▲ 钢球跌落测试
Impact resistant Test
用 227 克钢球从1.8米高度冲击中心孔至玻璃边缘的中间点不破碎。
Use 227g steel ball from the height of7.8monto glasssurface( 1/2 place betwen center of hole and the glass edge)no broken.
▲ 玻璃进料检验测试
Incoming Test for glass raw material
对购进的每批玻璃原料进行小批量试生产和耐高温测试，确保原料满足产品质量要求。
Small trial production for each batch purchased glass raw material and make 260℃ high temperature test to ensure the raw material quality.
▲ 温差测试
Heat-resistance Test
产品可在 260 度的烤箱内保持1小时后取出投入室温水中保持2分钟以上不破裂。
Put the lid in muffle furnace at the temperature of2 and maintain them for 1 hour, take off the lid from the muffle furnace and throw it rapidly into a container of water (the water should have a temperature of 20'℃ and samples should stay in the water for a time longer than 2 minutes without breakage.
